Bitumen binder grades are standardised classifications based on penetration, viscosity, or performance under different temperature conditions. The main systems in use are Penetration Grade, Viscosity Grade (VG), Performance Grade (PG) and Polymer Modified Bitumen (PMB).

Penetration grade bitumen is a conventional paving binder widely used in road construction and asphalt pavement production. It is classified by penetration value — a measure of how far a standard needle sinks into the bitumen under set test conditions, which indicates hardness or softness. Common grades include 60/70, a medium-hard option, and 80/100, which is softer and more flexible.

Bitumen 60/70 has a penetration value between 60 and 70, making it harder than softer grades. Its lower penetration range means it resists deformation under thermal and traffic loading. Bitumen 80/100 sits at the softer end of the scale with greater ductility, allowing the binder to accommodate temperature swings without cracking.

Penetration grading measures physical hardness at a fixed test temperature, while viscosity grading (VG-30, VG-40) characterises flow behaviour, and performance grading (PG 64-22, PG 70-22, PG 76-22) ties the binder specification to expected high- and low-temperature service conditions. Polymer Modified Bitumen (PMB) adds polymers to conventional bitumen to improve elasticity and temperature resistance.

Grade selection depends on climate, traffic volume and loading, national standards and specifications for the project's jurisdiction, and specific project requirements including pavement type and expected service life.